User Manual Q&AAnswer
Dec 27, 2024 - 07:58 AM
To turn on the laser lines on the PREXISO PLV2 Multi Surface Laser Level, follow these steps:
1. Locate the ON/OFF switch on the laser tool. It is labeled as "D" in the user manual and is located on the front of the tool.
2. Slide the ON/OFF switch to the middle position to turn on the horizontal lasers, angle dial, and vial LED light. This will activate the horizontal laser line.
3. If you also want to activate the vertical laser line, slide the ON/OFF switch all the way to the right. This will turn on both the horizontal and vertical lasers, angle dial, and vial LED light.
4. To turn off the laser lines, slide the ON/OFF switch all the way to the left. This will turn off all the lasers, angle dial, and vial LED light.
Please note that the lasers, angle dial, and vial LED light can only be turned on by sliding the ON/OFF switch when the Laser, angle dial, and vial LED light trigger (D) is triggered on the wall mounting attachment or on a flat surface.
For more information and visual references, please refer to the user manual provided with the product.
Add New Comment