User Manual Q&AAnswer
Dec 27, 2024 - 07:26 AM
To switch between self-leveling mode and manual mode on the RockSeed LV1 Line Laser, follow these steps:
1. Locate the slide switch on the side of the laser unit.
2. Slide the switch to the "Self-Leveling" position for automatic self-leveling mode.
3. The laser will automatically adjust and level itself within a ±4° range, providing accurate horizontal or vertical lines.
To switch to manual mode:
1. Slide the switch to the "Manual" position.
2. In manual mode, the self-leveling feature is disabled, allowing you to lock the laser lines at any angle.
3. This is useful for tasks that require non-standard angles or when the laser is placed on an uneven surface.
Please refer to the user manual for more detailed instructions and illustrations on how to switch between self-leveling mode and manual mode on the RockSeed LV1 Line Laser.
Add New Comment