User Manual Q&AAnswer
Dec 27, 2024 - 06:24 AM
Installing the AUDERWIN 8795 Waterproof Solar Spot Lights is a straightforward process. Here are the step-by-step instructions:
1. Choose a sunny location: Select a spot that receives ample sunlight throughout the day for optimal solar panel exposure.
2. Decide on the installation method: The AUDERWIN 8795 lights can be installed using either the included ground stakes or wall mounting brackets, depending on your preference and the area you want to illuminate.
3. Ground stake installation:
a. Insert the ground stake into the ground at your desired location.
b. Attach the AUDERWIN 8795 light to the top of the ground stake by aligning the slots on the light with the tabs on the stake. Push the light down until it is securely attached.
4. Wall mounting installation:
a. Choose a suitable wall or surface for mounting the lights.
b. Use the provided wall mounting brackets to attach the AUDERWIN 8795 lights to the desired location. Ensure the brackets are securely fastened.
5. Power on the lights: Before installing, make sure to turn on the light using the power switch located on the back or bottom of the light.
6. Position the lights: Adjust the angle of the light head to direct the beam as needed. This allows you to focus the light on specific areas or objects.
7. Adjust brightness settings: The AUDERWIN 8795 lights offer adjustable brightness settings. Use the control options provided, such as the included remote control, to customize the brightness level according to your preference.
By following these installation steps, you should be able to set up and enjoy the benefits of the AUDERWIN 8795 Waterproof Solar Spot Lights in your outdoor space. For further assistance or troubleshooting, refer to the user manual provided with the product.
Add New Comment