User Manual Q&AAnswer
Dec 27, 2024 - 05:56 AM
The main reason your HDMI splitter may not be working with your television is that it may not be set up properly to support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection protocol that ensures that the content being transmitted is not being illegally copied or distributed.
To troubleshoot the issue, you can try the following steps:
1. Check the compatibility: Ensure that your HDMI splitter is compatible with your television and HDMI devices. The OREI UltraHD 4K @ 60 Hz 1 X 2 HDMI Splitter 1 in 2 Out 2 Port 2 is designed to support HDMI 2.0b and HDCP 2.2, so make sure your devices also support these standards.
2. Check the HDMI cables: Ensure that you are using high-quality HDMI cables that are capable of transmitting the required bandwidth for 4K resolution at 60Hz. Faulty or low-quality cables can cause signal loss or degradation.
3. Check the TV settings: Make sure that your television is set to the correct input source where the HDMI splitter is connected. Some TVs have multiple HDMI ports, so double-check that you have selected the correct one.
4. Power cycle the devices: Try power cycling all the devices involved in the setup. Turn off your TV, HDMI splitter, and HDMI devices, unplug them from the power source, wait for a few minutes, and then plug them back in and power them on.
5. Reset the HDMI splitter: If the above steps don't work, you can try resetting the HDMI splitter. Refer to the user manual of your specific HDMI splitter model for instructions on how to reset it.
If the issue persists, it is recommended to reach out to the manufacturer's customer support for further assistance. They will be able to provide specific troubleshooting steps or determine if there is a defect with the HDMI splitter.
Add New Comment