User Manual Q&AAnswer
Dec 27, 2024 - 05:17 AM
To pair the Mipeace Bluetooth earplug headphones with your mobile phone, please follow these steps:
1. Make sure the earbuds are turned off. If they are on, press and hold the multifunction button for 3 seconds to turn them off.
2. Press and hold the multifunction button for 5 seconds until the red and blue lights flash alternately. This indicates that the earbuds are in pairing mode.
3. On your mobile phone, enable Bluetooth and search for available devices. Look for the Bluetooth ID "Mipeace" and select it.
4. Wait for a prompt voice saying "connected" to confirm that the pairing is successful.
Note: If the earbuds fail to connect within 2 minutes, they will exit pairing mode. If they fail to connect again within 5 minutes, they will automatically turn off. In such cases, you can press and hold the multifunction button again to re-enter pairing mode.
Once the initial pairing is complete, the earbuds will automatically connect to the last device they were connected to when powered on again.
If you encounter any issues during the pairing process, make sure that your mobile phone's Bluetooth function is turned on and try restarting both your phone and the earbuds. Additionally, you can press and hold the volume up (+) and volume down (-) buttons for about 4 seconds to disconnect the earbuds from the previous device and enter pairing mode again.
For more detailed instructions and troubleshooting tips, please refer to the complete instruction manual provided with the Mipeace Bluetooth earplug headphones.
Add New Comment