User Manual Q&AAnswer
Dec 27, 2024 - 05:03 AM
To pair your Altec Lansing IMT804N Sonic Boom speaker with your Bluetooth device, follow these steps:
1. Power on your speaker and make sure the ON/OFF switch on the rear of the speaker is in the ON position.
2. Go to the Bluetooth Manager on your Bluetooth device (e.g., smartphone, tablet, etc.).
3. Search for Bluetooth devices and select "Sonic Boom" from the list of available devices.
4. Your speaker will automatically go into pairing mode, indicated by the LED status light on the button turning blue and flashing.
5. Once your speaker successfully pairs with your Bluetooth device, the LED status light will stop flashing and remain blue.
If you want to pair additional Bluetooth devices to your Sonic Boom speaker, you can do so by pressing the "- and +" buttons simultaneously on the speaker. This will put the speaker back into pairing mode, and you can follow the same steps to pair another Bluetooth audio source.
You can also use the included 3.5mm Auxiliary Cable to connect audio devices through the AUX-In port on your speaker.
For more detailed instructions and information, please refer to the user manual provided with your Altec Lansing IMT804N Sonic Boom speaker.
Add New Comment