User Manual Q&AAnswer
Dec 27, 2024 - 04:42 AM
To change the lighting mode on the ALOVECO ZS050J10RC-TM Globe Starry Fairy Lights, follow these steps:
1. Make sure the lights are turned on and the batteries are properly installed in the battery compartment.
2. Locate the remote control that came with the lights.
3. On the remote control, you will find several buttons. Look for the button labeled "Mode" or "Lighting Mode". It is usually represented by an icon with different symbols or patterns.
4. Press the "Mode" button to cycle through the different lighting modes. Each press will switch to the next mode.
5. Keep pressing the "Mode" button until you find the desired lighting mode. The lights will change accordingly to the selected mode.
6. If you want to adjust the brightness of the lights, look for buttons labeled "Brightness" or "Dim". Press the "+" button to increase the brightness and the "-" button to decrease it.
7. Experiment with the different lighting modes and brightness levels to create your desired ambiance.
Note: The specific buttons and icons on the remote control may vary slightly depending on the model and version of the lights. Refer to the user manual for your specific model for more detailed instructions and illustrations.
For further assistance or troubleshooting, please refer to the ALOVECO ZS050J10RC-TM Globe Starry Fairy Lights User Manual.
Add New Comment