User Manual Q&AAnswer
Dec 27, 2024 - 04:09 AM
To connect the Logitech Z623 speaker system to your computer, follow these steps:
1. Locate the 3.5 mm audio input cable that is included in the box. This cable has a 3.5 mm jack on both ends.
2. Plug one end of the audio input cable into the 3.5 mm jack on the back of the right satellite speaker.
3. Plug the other end of the audio input cable into the audio output jack on your computer. This is usually a green-colored jack labeled "Line Out" or "Headphone Out."
4. Make sure the power button on the back of the right satellite speaker is turned on.
5. Adjust the volume and bass controls on the front of the right satellite speaker to customize your listening experience.
Note: If you prefer to use the headphone output on your computer, you can plug your headphones directly into the jack on the front of the right satellite speaker. Make sure to adjust the volume for your headphones using the controls on the front of the speaker.
For more detailed instructions and troubleshooting tips, please refer to the user documentation included in the box or visit the Logitech website at www.logitech.com.
Add New Comment