User Manual Q&AAnswer
Dec 27, 2024 - 04:03 AM
To connect your speakers to the Denon AVR-X3700H receiver, follow these steps:
1. Identify the speaker outputs on the back of the receiver. The AVR-X3700H supports up to 9.2 channels, so you can connect up to nine speakers and two subwoofers.
2. For each speaker, use speaker wire to connect the positive (+) terminal on the back of the receiver to the corresponding positive terminal on the speaker. Repeat this process for the negative (-) terminals.
3. Make sure to connect the speakers according to the recommended speaker layout for your desired audio setup. The receiver's manual provides detailed diagrams and instructions for various speaker configurations.
4. Once all the speakers are connected, double-check the wiring to ensure that each speaker is properly connected and securely attached.
5. Power on the receiver and follow the on-screen setup assistant or refer to the manual to configure the speaker settings. The setup assistant will guide you through the process of assigning each speaker to its corresponding channel and adjusting the speaker levels.
By following these steps, you should be able to successfully connect your speakers to the Denon AVR-X3700H receiver and enjoy immersive audio in your home theater setup. For more detailed instructions, please refer to the complete feature/instruction guide provided with the product
Add New Comment