User Manual Q&AAnswer
Dec 27, 2024 - 03:59 AM
To connect your phone to the Pyle PTA24BT Bluetooth amplifier, please follow these steps:
1. Make sure the amplifier is powered on and the volume is set to a low level.
2. Connect the Bluetooth antenna to the back panel of the amplifier for better signal reception.
3. Press the BT/Line button switch on the front panel of the amplifier. You will hear the voice prompt "POWER ON" and "PAIRING", indicating that the amplifier is ready to pair with your phone.
4. On your phone, go to the Bluetooth settings and turn on the Bluetooth feature.
5. Search for available Bluetooth devices and make sure your phone is within range of the amplifier.
6. In the list of available Bluetooth devices, select "BT-RY" (or "Pyle Speaker" depending on your device) to initiate the pairing process.
7. Once connected, you will hear a voice prompt saying "Your Device is Connected", indicating that the Bluetooth pairing is successful.
8. You can now play music on your phone, and it will be wirelessly transmitted to the Pyle amplifier and played through its speakers.
Please note that the specific steps may vary slightly depending on your phone's operating system. Refer to your phone's user manual for detailed instructions on how to connect to a Bluetooth device.
Add New Comment