User Manual Q&AAnswer
Dec 27, 2024 - 02:25 AM
To connect the Soundavo CSA-60 Stereo Amplifier to your audio source and speakers, follow these steps:
1. Connect your audio source to the amplifier using either the 3.5mm or RCA inputs. If you have both inputs connected, they will mix together.
2. Connect your speakers to the amplifier using the provided terminals connector. For stereo operation, connect the left and right speaker wires to the corresponding terminals. For bridge-mono operation, connect the positive speaker wire to the L+ terminal and the negative speaker wire to the R- terminal.
3. Plug the amplifier into an electrical outlet using the provided power lead.
4. Press the POWER button to turn on the amplifier. A green LED will indicate that the amplifier is ready to use. If the amplifier is in the "Auto-On" state to conserve power, a red LED will be displayed.
5. Turn on your audio source device and set the output level.
6. Adjust the volume using the rotary volume control on the amplifier. Turning it clockwise will increase the volume level.
Please note that after 5 minutes of inactivity, the amplifier will go into the "Auto On" state.
For more detailed information and illustrations, please refer to the Soundavo CSA-60 Stereo Amplifier User Manual: [link to the manual](https://cdn.shopify.com/s/files/1/011...)
Add New Comment