User Manual Q&AAnswer
Dec 27, 2024 - 01:49 AM
Here are the step-by-step instructions for installing the AZDOME M550 Dash Cam:
1. Insert the Micro SD card into the Micro SD slot of the dash cam and format the card.
- Note: Use a high-speed Micro SD card, Class 10 or above.
2. Connect the magnetic bracket to the dash cam to ensure a firm connection.
3. Turn off your car engine.
4. Attach the magnetic bracket with the camera onto your windshield.
5. Connect the USB charging cable to the mini USB port of the magnetic bracket. Run the cable along the edge of the windshield and tuck it away in the seams, extending it to the USB port of the car charger. Make sure to keep it away from the airbag area.
6. Plug in the cabin camera and rear camera, and adjust the dash cam to keep the lens level with the ground.
7. Start the engine to check if the dash cam works properly.
Note: For installing the rear camera, there are specific steps provided in the user manual with illustrations. It involves selecting a suitable location near the number plate lamp, attaching the camera with tape and screws, and connecting the rear plug to the rear camera interface of the recorder.
Please refer to the user manual for more detailed instructions and illustrations on the installation process.
Add New Comment