User Manual Q&AAnswer
Dec 26, 2024 - 08:28 PM
To replace the ear hooks and ear tips on your Plantronics Voyager headset with the CuWire Earbuds Earhooks Bluetooth Replacement Set, follow these steps:
1. Remove the old ear hooks: Gently pull the old ear hooks away from the headset until they detach.
2. Attach the new ear hooks: Take one of the new ear hooks from the 2-pack included in the set. Align the hook with the corresponding slot on the headset and slide it in until it securely attaches.
3. Remove the old ear tips: Carefully pull the old ear tips off the speaker of the earbud.
4. Attach the new ear tips: Take one of the new ear tips from the set (small, medium, or large) based on your preference and fit. Press the ear tip against the speaker of the earbud until it fits snugly.
5. Repeat for the other earbud: Repeat steps 3 and 4 for the other earbud, ensuring that both ear hooks and ear tips are securely attached.
Note: The CuWire Earbuds Earhooks Bluetooth Replacement Set is compatible with most Plantronics Bluetooth models, including Marque M155, Marque 2 M165, Savor M1100, M100, M55, M28, and M25. It is also suitable for many other Bluetooth devices.
For further assistance or troubleshooting, please refer to the instruction guide included in the package.
Add New Comment