User Manual Q&AAnswer
Dec 26, 2024 - 08:14 PM
To pair the T12 earbuds with your device, follow these steps:
1. Make sure the earbuds are fully charged and powered on.
2. Enable the Bluetooth function on your electronic device.
3. Open the charging case and take out both earbuds. The master earbud (left earbud by default) will start flashing orange and white LED lights alternately.
4. On your device, search for Bluetooth devices and select "T12" from the list.
5. Once connected, the LED lights on the earbuds will turn solid white, indicating a successful connection.
6. After the initial pairing, the earbuds will automatically reconnect to the previously connected device when powered on.
If you encounter any issues during the pairing process, ensure that the earbuds are within the range of your device and that they are not paired with any other devices. You can also try resetting the earbuds to factory default settings by turning them off, then long-pressing the multifunction button for 15 seconds until the LED lights flash orange and white. After resetting, follow the pairing steps again.
For more detailed instructions and troubleshooting, refer to the user manual provided with the product.
Add New Comment