User Manual Q&AAnswer
Dec 26, 2024 - 09:40 AM
To hang the JTLMEEN GF-004A Cloud and Moon Neon Light on the wall, follow these steps:
1. Unpack the light: Take the neon light and other parts out of the package.
2. Verify the contents: Make sure you have the USB cable, extra hook, neon light main unit, and any other supplies.
3. Select the installation site: Decide where you want to hang or install the neon light. Make sure it is close to a USB power source.
4. Use the hook: Attach the included hook to the hole on the corner of the light. This will make hanging the neon light easier.
5. Mounting option: You have the option of mounting the lamp on a flat surface, such as a table, or hanging it from the wall using the hook.
6. Connect the USB cable: Insert the 2-meter USB cable into the USB interface of the neon light.
7. Power source: Attach the USB cable's other end to a USB port on your computer, a power bank, or any other compatible device.
8. Power on: Once the lamp is connected to a power source, it should turn on and start glowing.
9. Placement adjustment: If needed, move the light to a more visible and well-displayed location.
10. Secure installation: Make sure the hook is tight and the light is positioned on a stable surface to ensure it stays in place.
11. Cable management: Tuck any extra cable neatly behind the light or along the wall to keep the space neat.
12. Test different angles: Check the light from various angles to make sure it produces the intended effect. Adjust the brightness settings if available.
Note: Avoid direct water contact and periodically inspect the connections and the light itself to ensure it is in good operating order.
Add New Comment