User Manual Q&AAnswer
Dec 26, 2024 - 08:34 AM
To change the lighting modes and set timers on the Feibao YG-LA-01 Waterproof Laser Lights, follow these steps:
1. Ensure that the laser lights are properly plugged into a power source and turned on.
2. Use the included RF remote control to access the various settings and features.
3. To change the lighting modes, press the "Mode" button on the remote control. Each press will cycle through the available modes. The Feibao YG-LA-01 Waterproof Laser Lights offer multiple display modes, including green, red, or mixed colors.
4. To set a timer for automatic shut-off, press the "Timer" button on the remote control. Each press will cycle through different timer intervals, such as 2, 4, 6, 8, 16, 18, 20, and 22 hours. Select the desired timer interval by pressing the "Timer" button repeatedly until the desired time is displayed.
5. To adjust the speed of the laser patterns, press the "Speed" button on the remote control. Each press will increase or decrease the speed of the patterns. Experiment with different speeds to achieve the desired effect.
6. If you want to change the color of the laser lights, press the "Color" button on the remote control. Each press will cycle through the available colors, such as green, red, or mixed colors.
7. Make sure to point the remote control towards the laser lights and ensure there are no obstacles blocking the signal between the remote and the unit.
By following these steps, you should be able to easily change the lighting modes, set timers, and customize the settings of the Feibao YG-LA-01 Waterproof Laser Lights. For more detailed instructions and information, please refer to the user manual provided with the product.
Add New Comment