User Manual Q&AAnswer
Dec 26, 2024 - 08:29 AM
To switch between the different modes on the Amosamz EMS-26 Party Lights, you have two options: using the remote control or the buttons on the unit itself.
Using the Remote Control:
1. Make sure the lights are powered on and the remote control has fresh batteries.
2. Point the remote control towards the lights, ensuring there are no obstructions between the remote and the lights.
3. Press the "Mode" button on the remote control to cycle through the different modes. Each press will switch to the next mode in the following order: Automatic, Sound-activated, and Flash.
Using the Buttons on the Unit:
1. Make sure the lights are powered on.
2. Locate the "Mode change" button on the unit. It is labeled with an icon representing mode change.
3. Press the "Mode change" button to cycle through the different modes. Each press will switch to the next mode in the following order: Automatic, Sound-activated, and Flash.
By following these instructions, you should be able to easily switch between the different modes on the Amosamz EMS-26 Party Lights.
Add New Comment