User Manual Q&AAnswer
Dec 26, 2024 - 08:21 AM
To turn on the Bolylight ST0002 LED Birch Tree Lamp, follow these steps:
1. Ensure that the lamp is properly unpacked and the branches are not damaged.
2. Locate the battery compartment at the base of the lamp.
3. Open the battery compartment and insert the required batteries according to the polarity markings (+/-).
4. Close the battery compartment securely to ensure proper functioning.
5. Look for the push-button switch located at the base of the lamp.
6. Press the push button to turn on the lamp and activate the LED lights.
7. The lamp should now be illuminated, creating a warm and cozy ambiance.
If the lamp does not turn on, please check the following:
- Ensure that the batteries are inserted correctly and have enough power.
- Make sure the battery compartment is closed securely.
- If using USB connectivity, ensure that the lamp is properly connected to a compatible USB port or power source.
If you are still experiencing issues, refer to the troubleshooting section in the user manual or contact Bolylight customer support for further assistance.
Add New Comment