User Manual Q&AAnswer
Dec 26, 2024 - 05:52 AM
To pair the remote control with the Really RAD Robots FB-01 Remote Control xxxx Robot, please follow these steps:
1. Make sure both the robot and the remote control have fresh batteries installed.
2. Turn on the robot and the remote control using their respective power switches.
3. Check the manual for any specific instructions on how to pair the remote control with the robot. Some models may have a specific pairing process.
4. If there are no specific instructions, ensure that the remote control is within range of the robot and that there are no obstructions blocking the signal.
5. Try resetting both the robot and the remote control by turning them off and on.
6. Press and hold the pairing button on the remote control (if available) for a few seconds. This button is usually located on the remote control and may be labeled as "Pair" or have a Bluetooth symbol.
7. While holding the pairing button, press and hold the corresponding button on the robot that activates a movement or sound. This will vary depending on the specific model and its features.
8. Release both buttons and wait for a few seconds to see if the remote control and the robot are successfully paired. You may see a light or hear a sound indicating the pairing process is complete.
9. Test the remote control by pressing different buttons to see if the robot responds accordingly.
If the remote control still doesn't work after following these steps, please refer to the troubleshooting section of the manual or contact customer service for further assistance.
Source: https://manuals.plus/really-rad-robot... xxxx -robot-user-manual
Add New Comment