User Manual Q&AAnswer
Dec 26, 2024 - 05:50 AM
To replace the battery in the WowWee 4183 Interactive xxxx Figurine, please follow these steps:
1. Locate the battery compartment on the figurine. It is usually located at the back or bottom of the figure.
2. Open the battery compartment by sliding or lifting the battery cover. Some models may require a small screwdriver to remove the cover.
3. Remove the old LR44 battery from the compartment. Pay attention to the battery's polarity (positive and negative ends).
4. Insert a new LR44 battery into the compartment, ensuring that the polarity is correct. The positive (+) side should be facing up.
5. Close the battery compartment by sliding or securing the battery cover back into place. Make sure it is firmly secured to prevent any battery contact issues.
6. Turn on the figurine using the power switch, typically located near the battery compartment.
Your WowWee 4183 Interactive xxxx Figurine should now have a fresh battery and be ready for use. If you continue to experience any issues, refer to the troubleshooting section of the user manual or contact WowWee customer support for further assistance.
Source: https://manuals.plus/wowwee/wowwee-41... xxxx -figurine-user-manual
Add New Comment