User Manual Q&AAnswer
Dec 26, 2024 - 04:59 AM
Sure! Here is a step-by-step guide on how to install the FAHREN QH11KOYA3I LED Driving Fog Light Bulb:
1. Check Compatibility: Before installation, make sure the bulb is compatible with your car's fog light sockets. You can refer to your car's instructions or use a "car bulb finder" tool.
2. Prepare the Area: Turn off your car and let it cool down before starting the installation process.
3. Locate the Fog Light Housing: The fog light housing is usually located at the front of your car.
4. Remove the Old Bulb: Twist and pull out the old bulb from the fog light housing.
5. Inspect the Connector: Before proceeding, check the plug for any dirt or damage.
6. Align the LED Bulb: Make sure the pins on the QH11KOYA3I LED bulb are properly aligned with the socket.
7. Plug and Play: Simply insert the bulb into the socket without making any changes or using any tools.
8. Adjust the Beam: Use the adjustable adapter ring to fine-tune the beam alignment. The ring can be turned 360 degrees for optimal beam direction.
9. Secure the Bulb: Twist the bulb into place to ensure it stays securely in the socket.
10. Reinstall the Dust Cover: When putting the dust cover back on, make sure it is properly covered to prevent dust from entering.
11. Test the Bulb: Start your car and check if the fog lights are working correctly.
12. Check for Compatibility Issues: If you experience flickering, you may need to add more resistors to address compatibility issues.
13. Fine-tune the Beam: To achieve the best vision, use a wall or garage door to adjust and optimize the beam pattern.
14. Ensure a Tight Fit: Make sure the bulb is firmly in place and does not move.
15. Final Check: Verify that both fog lights are working and have the same brightness.
Please note that this is a general installation guide. It is always recommended to refer to the user manual provided with the product for specific instructions and any additional information.
Add New Comment