User Manual Q&AAnswer
Dec 26, 2024 - 04:55 AM
To install the GXENOGO GXTM0511 LED Fog Light, follow these steps:
1. Take it out of the box: Remove the fog lights from the packaging and ensure that all the necessary parts are included, such as the fog lights, connectors, and tools.
2. Check compatibility: Verify that the fog lights are compatible with your vehicle model. The GXTM0511 fog lights are designed to replace OEM fog lights and are compatible with various Toyota models, including Tacoma (2005–2011), Solara (2004–2006), Sequoia (2008–2015), and Tundra (2007–2013).
3. Disconnect the battery: For safety purposes, disconnect the battery from your vehicle before starting the installation process.
4. Remove the old fog lights: Loosen the wire harness on the OEM fog light assembly using a wrench.
5. Place the new fog lights: Install the GXTM0511 fog lights in the designated location on your vehicle, following the instructions provided.
6. Connect the wiring harness: Connect the new fog lights to the original wiring harness that is already in place. Ensure that the positive and negative links are correctly aligned.
7. Check the connector: If the lights do not turn on, try turning the connector around 180 degrees and double-check the wire connections.
8. Attach the fog lights: Use the included tools and adjusting screws to securely attach the fog lights to your vehicle.
9. Adjust the angle: Modify the fog lights' angle to ensure they are properly aligned for optimal visibility on the road.
10. Test the lights: Reconnect the battery to your vehicle and verify that the fog lights are functioning correctly.
11. Align the beam: Use the setting xxxx to align the fog light beam, ensuring it provides a clear and focused illumination.
12. Waterproof sealing: Confirm that the waterproof seals are intact to prevent water from entering the fog lights.
13. Reassemble the housing: If necessary, reassemble any housing or other parts that were removed during the installation process.
14. Verify proper functionality: Once the fog lights are installed, turn them on and ensure that the beam strength and direction remain consistent.
15. Comply with local regulations: Ensure that the fog lights are installed correctly and comply with any local traffic rules regarding their usage.
For more detailed instructions and illustrations, please refer to the GXENOGO GXTM0511 LED Fog Light User Manual provided with the product.
Add New Comment