User Manual Q&AAnswer
Dec 26, 2024 - 04:52 AM
To switch between different modes on the SPOOBOOLA EMS-08L Laser Lights Projector, you can use the remote control that comes with the projector. Here are the steps:
1. Make sure the projector is powered on and connected to a power source.
2. Point the remote control towards the projector.
3. Locate the mode selection buttons on the remote control. These buttons are usually labeled or indicated by icons representing the different modes.
4. Press the appropriate mode selection button to switch to the desired mode. For example, if you want to switch to sound-activated mode, press the button that corresponds to sound-activated mode.
5. The projector will now operate in the selected mode, and the light effects will adjust accordingly.
If you are unable to find the mode selection buttons on the remote control or if the remote control is not functioning properly, please check the battery of the remote control and replace it if necessary. Additionally, ensure that there are no obstructions between the remote control and the projector, as this can affect the signal transmission.
For more detailed instructions and illustrations, please refer to the user manual provided with the SPOOBOOLA EMS-08L Laser Lights Projector.
Add New Comment