User Manual Q&AAnswer
Dec 26, 2024 - 04:50 AM
To install the AUXITO PSX24W LED Fog Light Bulb, please follow these steps:
1. Check for Compatibility: Make sure you have the correct bulb size (PSX24W/2504/12276) for your vehicle. Refer to your car's manual or the original bulb for confirmation.
2. Turn Off the Car: Ensure that your vehicle is not running to avoid any electric shock or short circuit.
3. Find the Fog Light Housing: Locate your car's fog light assembly and remove any covers or parts that may be blocking access to the fog light.
4. Remove the Stock Bulbs: Carefully twist or unclip the old fog light bulbs from the socket, depending on your car's design.
5. Align the New Bulbs: Insert the AUXITO PSX24W LED fog light bulbs into the plug, ensuring they are aligned correctly with the filament position of the bulb.
6. Secure the Bulbs: Once aligned, gently twist or push the bulbs into place, ensuring they are firmly seated in the fog light case.
7. Reconnect Power: Reconnect any wires or plugs that were disconnected during the installation process.
8. Test the New Bulbs: Turn on your vehicle and test the new fog lights to ensure they are functioning properly and providing sufficient light.
9. Adjust the Beam Pattern: If necessary, adjust the position of the fog lights to achieve the best coverage on the road.
10. Check for Error Warnings: If you encounter an error message or lights that flicker, you may need to add load resistors (sold separately) to resolve the issue.
11. Use Only for Fog/DRL: Ensure that the bulbs are installed in the correct position for fog lights or daytime running lights. These bulbs are not suitable for use as high or low-beam headlights.
12. Ensure Proper Heat Dissipation: Make sure there are no obstructions around the fog light assembly, allowing for proper airflow and heat dissipation.
13. Check for a Secure Fit: Confirm that the bulbs are securely in place within the housing and that the connectors are tightly connected.
14. Test Light Angle: Ensure that the fog lights are properly aligned to provide optimal road visibility without causing glare to other drivers.
15. Finish Installation: Once everything is securely in place, reassemble any parts or covers that were removed during the installation process.
For further details and visual guidance, please refer to the AUXITO PSX24W LED Fog Light Bulb User Manual provided with the product.
Add New Comment