User Manual Q&AAnswer
Dec 26, 2024 - 04:46 AM
Here is a step-by-step guide on how to install the Nilight 18022C-B LED Light Bar on your vehicle:
1. Unbox the LED Light Bar: Take the Nilight 18022C-B light bar and the fastening hardware out of the box.
2. Check Compatibility: Make sure the light bar fits your car by looking at the size (2PCS 6.5 Inch) and ensuring it fits all cars.
3. Turn Off the Car: To ensure your safety during setup, turn off your car and unplug the battery before starting the installation.
4. Install the Mounting Bracket: Use the screws that come with the bracket to attach it to the car in any place you want.
5. Position the Light Bar: Put the light bar on the attached bracket, making sure it is straight and can be adjusted.
6. Tighten the Brackets: To keep the light bar in place, make sure the bolts on the movable mounting bracket are tight.
7. Wire the Light Bar: Ensure a strong connection between the power and ground wires of the light bar and your car's electrical system.
8. Check Wire Length: Make sure the wires are long enough to reach the ground and power sources. Use extra cords if necessary.
9. Connect to Power Source: Pair up the positive wire with the 12V power source in the car and the negative wire with the ground.
10. Change the Light Beam: Adjust the light bar's fixing bracket to change the direction of the beam for optimal lighting.
11. Test the Light: Reconnect the car's battery and turn on the lights to ensure the light bar is functioning properly.
12. Check the Beam Pattern: Make sure the combination of spot and flood beams provides sufficient light at both close and far distances.
13. Ensure Secure Installation: Double-check all mounting bolts to ensure the light bar is securely in place and won't move while driving.
14. Check for Electrical Problems: Run the car while testing the light bar to ensure there are no electrical problems or short circuits.
15. Final Test: Test the light bar at night to ensure it provides sufficient light in low-light conditions.
Please note that this is a general installation guide. For specific instructions and details, refer to the Nilight 18022C-B LED Light Bar User Manual provided with the product.
Add New Comment