User Manual Q&AAnswer
Dec 26, 2024 - 04:44 AM
To install the LUYED LY-10171 880 LED Fog Light, please follow these step-by-step instructions:
1. Take the bulbs out of their box carefully and inspect them for any damage that may have occurred during shipping.
2. Check for compatibility: Make sure the bulb size fits the fog light or DRL fitting on your car.
3. Turn off vehicle power: To avoid getting an electric shock, turn off the vehicle and unplug the battery before starting the installation.
4. Take out the original bulbs: Carefully open the fog light compartment and remove the original halogen lamps.
5. Remove any dirt or water from the bulb socket by wiping it down with a clean cloth.
6. Put the LED bulbs in: Carefully place the LUYED LED fog light bulbs in the bulb socket, making sure they fit snugly.
7. Check bulb orientation: Make sure the bulbs are facing the right way and that they fit tightly into the case.
8. Connect the power source: Connect the car's battery or power source.
9. Test the light bulbs: Start the car and check the lights to make sure they are working correctly.
10. Change the beam: If the fog lights can be adjusted, make small changes to the beam direction to achieve the best light output.
11. Secure the bulbs: Ensure that the bulbs are firmly in place so they do not move or vibrate while driving.
12. Check the wiring: Double-check the connections between the wires to ensure they are secure.
13. If your car has a CAN-Bus system, check for error codes and flashing to ensure there are no issues.
14. Final test: Turn on the car's fog lights and test them in real-life driving situations to ensure they work well and provide adequate brightness.
Please refer to the LUYED LY-10171 880 LED Fog Light Instruction Manual for any additional information or troubleshooting tips.
Add New Comment