User Manual Q&AAnswer
Dec 26, 2024 - 04:43 AM
Sure! Here is a step-by-step guide on how to install the NAOEVO 7 Inch LED Fog Light Bar on your vehicle, as outlined in the user manual:
1. Unbox the Light Bar: Carefully take the light bar out of its box and ensure all parts are included.
2. Get the mounting bracket ready: Use the screws provided to attach the movable 45° bracket to the light bar.
3. Find the area for installation: Choose a suitable location to mount the fog light bar, such as the bumper or roof rack of your vehicle.
4. Clean the Mounting Surface: Ensure the surface is clean and free of dirt to ensure proper adhesion.
5. Align the Bracket: Place the bracket in the desired position and use a pen to mark the mounting hole locations.
6. Drill Holes for Mounting: If necessary, use the marked areas as a guide to drill holes for mounting.
7. Secure the Bracket: Use bolts and nuts to attach the bracket securely to the mounting surface.
8. Connect the Light Bar: Place the light bar onto the bracket and adjust it to the desired angle.
9. Connect the wire: Connect the power plug on the light bar to the wire harness.
10. Route the Wires: Ensure the wires are safely routed to avoid tangling or contact with moving parts.
11. Connect to Power Source: Follow the orientation instructions and connect the wires to your vehicle's battery or fuse box.
12. Install the Switch: Place the surface-mount switch in a convenient location for easy operation.
13. Test the Light Bar: Turn on the light bar to ensure it functions properly.
14. Adjust the Beam Direction: Use the adjustable bracket to fine-tune the position of the light beam.
15. Secure Loose Wires: Use zip ties to secure any excess wire for a clean installation.
Please note that these instructions are a general guide, and it's always recommended to refer to the specific instructions provided in the user manual for your fog light bar model.
Add New Comment