User Manual Q&AAnswer
Dec 26, 2024 - 04:06 AM
To install the AUTOONE 10SF LED Fog Light Bulb, follow these steps:
1. Unbox the Bulbs: Take the AUTOONE 10SF LED fog light bulbs out of the box and inspect them for any damage.
2. Check Compatibility: Ensure that your car's fog light socket is compatible with H11, H9, H8, or 9005 bulbs.
3. Turn Off the Car: Before installation, make sure your car is turned off, the key is removed, and the battery is not connected.
4. Find the Fog Light Housing: Locate the fog light unit or the area where the existing bulbs are installed in your car.
5. Remove the Old Bulbs: Carefully twist and remove the old halogen bulbs, being cautious not to damage the wires or housing.
6. Clean the Housing: Clean the fog light housing to remove any dirt or moisture, ensuring optimal performance for the new LED bulbs.
7. Connect the AUTOONE 10SF Bulb: Place the AUTOONE 10SF LED fog light bulbs into the housing and twist them to secure them in place.
8. Connect the Wiring: Ensure that the bulb's wiring connector fits securely into the original socket on your car.
9. Test the Lights: Before closing the housing, test both lights to ensure they are functioning properly.
10. Align the Bulbs: Adjust the bulbs' alignment to ensure they provide the best light output without blinding other drivers.
11. Secure the Housing: Once the bulbs are properly aligned, reattach the fog light housing.
12. Check Connections: Double-check all electrical connections to ensure they are tight and free of rust.
13. Start the Car: Start the car and test the fog lights to ensure they are working correctly. Both lights should be bright.
14. Adjust the Beam: If necessary, adjust the angle of the fog light beam to ensure even coverage of the road.
15. Final Check: Conduct a final inspection to ensure everything is secure and the fog lights are functioning properly.
For more detailed instructions and illustrations, refer to the AUTOONE 10SF LED Fog Light Bulb User Manual provided with the product.
Add New Comment