User Manual Q&AAnswer
Dec 26, 2024 - 03:56 AM
To change the batteries in the Mr.Winder 119 Carousel Horse Snow Globe, please follow these steps:
1. Locate the battery compartment on the bottom of the snow globe.
2. Open the battery compartment by sliding or lifting the cover, depending on the design.
3. Check the battery type required for the LED lights. It is usually stated in the user guide or on the battery compartment itself.
4. Insert the batteries into the compartment, making sure to match the positive (+) and negative (-) ends correctly.
5. Close the battery compartment securely to ensure proper contact and prevent any water or moisture from entering.
6. Test the LED lights by turning on the light switch, usually located on the base or side of the snow globe.
7. If the lights do not turn on, double-check the battery placement and ensure they are fully inserted.
8. If the issue persists, try replacing the batteries with fresh ones, as the previous batteries may be drained or expired.
Please refer to the user guide provided with your Mr.Winder 119 Carousel Horse Snow Globe for specific instructions and illustrations related to battery replacement. If you encounter any difficulties or have further questions, don't hesitate to contact the manufacturer's customer support for assistance.
Add New Comment