User Manual Q&AAnswer
Dec 26, 2024 - 03:41 AM
To connect the Donner EC966 Octave Guitar Pedal to your guitar and amplifier, follow these steps:
1. Plug your guitar into the 1/4" mono input jack of the Donner EC966 Octave Guitar Pedal.
2. Connect your amplifier to the 1/4" mono output jack of the pedal.
3. Ensure that both the guitar and amplifier are turned on and set to an appropriate volume level.
4. Power the pedal by connecting a 9V DC power adapter to the pedal's power input. Make sure the adapter provides the correct voltage and polarity (center negative).
5. Adjust the controls on the pedal to achieve your desired sound. The Octave xxxx selects the octave effect, the Tone xxxx adjusts the tonal quality, and the Level xxxx balances the effect signal with your dry signal.
6. To engage the effect, press the bypass switch. The LED indicator will light up to indicate that the effect is active.
7. To bypass the effect and return to your original sound, press the bypass switch again. The LED indicator will turn off to indicate that the effect is bypassed.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment