User Manual Q&AAnswer
Dec 26, 2024 - 03:27 AM
To pair the remote control with the Wemfg RH705 RC Boat, please follow these steps:
1. Ensure that both the boat and the remote control have fresh batteries installed.
2. Turn on the boat by sliding the power switch to the "On" position. The boat's LED lights should turn on.
3. Turn on the remote control by pressing the power button. The remote control's LED indicator should light up.
4. On the boat, locate the pairing button. It is usually located near the battery compartment or on the underside of the boat.
5. Press and hold the pairing button on the boat for a few seconds until the LED lights on the boat start flashing rapidly.
6. On the remote control, press and hold the pairing button until the LED indicator starts flashing rapidly.
7. Release both buttons and wait for a few seconds. The LED lights on both the boat and the remote control should stop flashing and remain steady, indicating that the pairing process is complete.
8. Test the remote control by gently moving the joystick or control sticks. The boat should respond to the remote control's commands.
If the boat and remote control do not pair successfully, please refer to the specific instructions provided in the user manual that came with your Wemfg RH705 RC Boat.
Add New Comment