User Manual Q&AAnswer
Dec 26, 2024 - 03:01 AM
Installing the LED lights in the ROBOTIME DG159 LED Cozy Kitchen House is a straightforward process. Here are the step-by-step instructions:
1. Review the instructions: Before starting the installation, carefully read the instruction manual provided with the kit. Familiarize yourself with the steps and illustrations to ensure a smooth assembly process.
2. Locate the LED light: In the kit, you will find the LED light included along with the other components.
3. Identify the placement: The instruction manual will indicate the specific areas where the LED lights should be installed. These areas are designed to enhance the visual appeal of the miniature kitchen.
4. Prepare the LED light: Before inserting the LED light, ensure that the batteries are not included in the kit. You will need two CR2032 batteries to power the LED lights.
5. Insert the LED light: Following the instructions, carefully insert the LED light into the designated area. Pay attention to the wiring and placement specified in the manual to ensure proper installation.
6. Connect the wiring: If the LED light requires wiring, make sure to follow the instructions provided in the manual. Connect the wires as directed to ensure the lights function correctly.
7. Secure the LED light: Once the LED light is in place, ensure it is securely attached to prevent any accidental dislodging during the assembly process.
8. Test the LED lights: After installation, turn on the LED lights to check if they are functioning properly. If the lights do not turn on, double-check the battery placement and ensure they are fresh.
Remember, the LED lights in the ROBOTIME DG159 LED Cozy Kitchen House require two CR2032 batteries, which are not included in the kit. Make sure to have these batteries on hand before starting the installation process.
Add New Comment