User Manual Q&AAnswer
Dec 26, 2024 - 02:51 AM
To install the batteries for the LED lights in the ROBOTIME DG104 LED Cathy's Flower House, please follow these steps:
1. Locate the LED light section in the kit. It should be labeled or indicated in the instruction manual.
2. The LED lights in the flower house require two CR2032 batteries, which are not included in the kit. Make sure you have these batteries on hand.
3. On the LED light section, you will find a small compartment or slot where the batteries need to be inserted. Open this compartment or slot.
4. Insert the two CR2032 batteries into the compartment, ensuring that the positive (+) and negative (-) ends are aligned correctly according to the markings inside the compartment. The positive end usually faces up.
5. Close the compartment securely to ensure the batteries are in place.
6. Once the batteries are installed, the LED lights should be ready to use. You can test them by turning on the switch or button provided on the LED light section.
Please note that the batteries are not included in the kit, so you will need to purchase them separately. Additionally, make sure to handle the batteries with care and dispose of them properly when they are no longer usable.
Add New Comment