User Manual Q&AAnswer
Dec 26, 2024 - 02:45 AM
To connect the FZONE SP-1 to a computer or other MIDI devices, follow these steps:
1. Make sure your computer or MIDI device has a USB-MIDI port or a MIDI input/output port.
2. Locate the USB-MIDI port on the FZONE SP-1. It is usually located on the back or side of the keyboard.
3. If you are using a USB-MIDI connection:
a. Connect one end of a USB cable to the USB-MIDI port on the FZONE SP-1.
b. Connect the other end of the USB cable to a USB port on your computer.
4. If you are using a MIDI connection:
a. Connect one end of a MIDI cable to the MIDI output port on the FZONE SP-1.
b. Connect the other end of the MIDI cable to the MIDI input port on your MIDI device.
5. Once the connection is established, make sure the FZONE SP-1 is powered on.
6. On your computer or MIDI device, open your preferred music production software or digital audio workstation (DAW).
7. In the software or DAW, locate the MIDI settings or preferences. This may vary depending on the software you are using.
8. In the MIDI settings, select the FZONE SP-1 as the MIDI input/output device.
9. You should now be able to send and receive MIDI data between the FZONE SP-1 and your computer or other MIDI devices.
Please refer to the user manual for specific instructions on MIDI setup and configuration for your particular software or DAW.
Add New Comment