How do I set up the Broadlink 6734134 RF Universal Remote? (Broadlink RF Universal Remote User Manual)

Answer

manuals.plus

Dec 26, 2024 - 01:51 AM

Setting up the Broadlink 6734134 RF Universal Remote is a straightforward process. Here are the step-by-step instructions:

1. Install Batteries: Open the battery compartment on the back of the remote and insert two AA batteries (or similar, depending on the packaging) following the indicated polarity.

2. Power On: Press the power button on the remote to turn it on. The LED indicator should light up.

3. Set Up Devices: To program your devices, follow these instructions:

a. Manual Setup: If your device is listed in the remote's library, you can manually select it by navigating through the menu using the arrow buttons and selecting the appropriate category and brand. Follow the on-screen prompts to complete the setup.

b. Learning Function: If your device is not directly supported, you can use the learning function to teach the remote new commands. Here's how:

i. Press and hold the "Learning" button on the remote until the LED indicator starts flashing.

ii. Point the original remote at the Broadlink remote, ensuring they are facing each other with no obstructions.

iii. Press the button on the original remote that you want to teach the Broadlink remote. The LED indicator on the Broadlink remote will turn solid, indicating that it has successfully learned the command.

iv. Repeat the process for each button you want to program.

4. Control Devices: Once you have set up your devices, you can use the programmed buttons on the Broadlink remote to control them. Simply press the corresponding button for the desired function.

Note: For more detailed instructions and troubleshooting tips, refer to the user manual that comes with the Broadlink 6734134 RF Universal Remote.

If you have any further questions or encounter any issues during the setup process, please consult the user manual or contact Broadlink's customer service for assistance.