User Manual Q&AAnswer
Dec 26, 2024 - 01:47 AM
To assemble the Ovente ST2620B Electric CYCLONIC VACUUM, please follow these steps:
1. Fit the hose onto the vacuum cleaner by inserting the rotating hose connection into the vacuum cleaner until you hear a click. To remove the hose, press the button at the side of the hose connection, and then pull it out.
2. Fit the telescopic tube into the other end of the hose.
3. Adjust the length of the telescopic tube by pushing the locking mechanism down and pulling in the bottom section of the tube to a suitable length. When storing, shorten the tube as far as possible.
4. Fit the floor brush into the telescope tube.
5. The floor nozzle has two settings. When cleaning hard surfaces (parquet flooring, flooring tiles, etc.), the nozzle brushes should be extended. When cleaning carpets and mats, the brushes should be retracted into the nozzle. Press the brush change button to switch between the two settings.
6. For other attachments such as the crevice and bristle brush, furniture nozzle, pet/sofa brush, and multi-angle brush, simply attach them to the telescopic tube or hose as needed.
Once assembled, you can plug in the vacuum cleaner, switch it on using the foot pedal button, and start using it for cleaning.
Please refer to the Ovente ST2620B Electric CYCLONIC VACUUM User Manual for more detailed instructions and illustrations.
Add New Comment