User Manual Q&AAnswer
Dec 26, 2024 - 01:43 AM
To install the batteries in the GILOBABY RT-001 SMART VOICE CONTROL ROBOT, please follow these steps:
1. Make sure you have the correct battery type for the robot.
2. Locate the battery bay on the robot.
3. Insert the batteries into the battery bay, making sure to align the positive (+) and negative (-) ends correctly.
4. Check that all the battery clips are properly connected. If any clip is not connected, adjust it to ensure a secure connection to the robot.
5. Ensure that the power connector is in the correct position.
6. If the robot does not work after installing the batteries, double-check the battery installation and connections.
Note: If you say "goodbye" or "sleep" to the robot, it will power off. To turn it on again, press the recording button on the robot's chest.
Add New Comment