User Manual Q&AAnswer
Dec 26, 2024 - 01:40 AM
To charge the ALLCELE SQN-008 Remote Control Robot, follow these steps:
1. Insert the USB cable into the robot's charging port.
2. Connect the other end of the USB cable to a power supply, such as a computer or a USB wall adapter.
3. The robot's charging light will turn on, indicating that it is charging.
4. Allow the robot to charge for approximately two hours. The charging light will turn off when the battery is fully charged.
5. Once fully charged, disconnect the USB cable from the robot.
Note: It is important to use the original USB charging cable provided with the robot to ensure safe and effective charging.
Add New Comment