How do I assemble the OWI Inc OWI-535 Robotic Arm Edge? (OWI Inc OWI-535 Robotic Arm Edge Instruction Manual)

Answer

manuals.plus

Dec 26, 2024 - 12:49 AM

Sure! Here are the step-by-step instructions for assembling the OWI Inc OWI-535 Robotic Arm Edge:

1. Start by unpacking all the components from the package. Make sure you have the OWI-535 Robotic Arm Edge Kit, Manual Joystick Controller, Set of Assembly Tools, Instruction Manual, and Set of Robotic Arm Components.

2. Begin assembling the arm by connecting the base to the main arm using the provided screws and assembly tools. Follow the instructions in the manual for the specific steps and xxxx placements.

3. Attach the elbow joint to the main arm using the provided screws. Again, refer to the manual for the correct xxxx placements.

4. Connect the wrist joint to the elbow joint using the screws provided. Make sure the joint is secure and aligned properly.

5. Attach the gripper to the wrist joint using the provided screws. Ensure that the gripper can open and close smoothly.

6. Connect the motors to their respective joints according to the instructions in the manual. Make sure the wiring is secure and properly connected.

7. Once all the components are assembled, connect the wired electric power source to the robotic arm. Insert the required D batteries into the robot and AA batteries into the wireless remote.

8. Test the arm's movement by using the manual joystick controller. Move the arm up, down, left, right, and around to ensure all the axes are functioning correctly.

9. Congratulations! Your OWI Inc OWI-535 Robotic Arm Edge is now assembled and ready to use.

Please note that these are general assembly instructions, and it is important to refer to the detailed instructions provided in the Instruction Manual for accurate and specific guidance.