User Manual Q&AAnswer
Dec 26, 2024 - 12:11 AM
To change the grinding heads on the Megainvo 23387882 Electric Baby Nail File, please follow these steps:
1. Make sure the device is turned off and the batteries are removed for safety.
2. Locate the release button on the side of the device, near the grinding head.
3. Press and hold the release button firmly.
4. While holding the release button, gently pull the current grinding head away from the device.
5. Once the old grinding head is removed, select the desired new grinding head for your baby's age and nail condition.
6. Align the new grinding head with the axis on the device.
7. Press the new grinding head firmly onto the device until it locks into place.
8. Release the release button to secure the new grinding head.
9. Reinsert the batteries (if removed) and turn on the device to start using the new grinding head.
Please refer to the "Setup Guide" section of the instruction manual for visual illustrations and additional information on changing the grinding heads.
Add New Comment