How do I install the VICNIE XDB-002 Deco LED Flush Mount? (VICNIE XDB-002 Deco LED Flush Mount Installation Instructions)

Answer

manuals.plus

Dec 25, 2024 - 10:33 PM


To install the VICNIE XDB-002 Deco LED Flush Mount, please follow these steps:

1. Turn off the main power at the circuit breaker before installing the fixture to prevent possible shock.
2. Remove the fixture and mounting package from the box and ensure that no parts are missing by referencing the illustrations on the installation instructions.
3. Take out the two fixing screws from the accessory package and drive them into the junction box, with 2/3 inside and 1/3 outside.
4. Turn the lamp shade anti-clockwise to remove the ceiling cover.
5. Connect the black and white wire of the luminaire with the corresponding wires from the junction box using wire connecting caps. Connect the ground wire of the luminaire with the ground wire from the junction box using a wire connecting cap.
6. Tuck all the wires and connections into the junction box. Align the mounting hole on the ceiling cover with the drive screws and twist the ceiling cover anti-clockwise to secure it.
7. Use a screwdriver to adjust the  xxxx 's outside length and fix the ceiling cover to the ceiling firmly.
8. Put the light shade back onto the light and twist it clockwise.
9. Turn on the power and light switch to activate the luminaire. Please note that it is dimmable and may require adjustment to reach maximum brightness.

Please refer to the provided installation instructions for detailed illustrations and additional information.

If you have any further questions or encounter any issues during installation, please contact Ecolux customer service at ecolux_customerservice@outlook.com for assistance.