User Manual Q&AAnswer
Dec 25, 2024 - 10:21 PM
Cleaning the ASAWASA Long Cyan Wax Melt Warmer is important to ensure optimal performance and longevity. Here are the steps to clean the wax warmer:
1. Let Cool: After using the wax warmer, wait for it to cool down completely before cleaning to avoid getting burned.
2. Remove the Dish and Clean It: Once the wax has cooled, carefully take off the top dish. Wash the dish with warm soapy water to remove any residue or buildup. Make sure to rinse it thoroughly and dry it before reusing.
3. Rub the Ceramic Surface: Clean the sandblasted ceramic surface of the wax warmer with a soft, wet cloth. This will help remove any dust or marks that may have accumulated. Avoid using rough or strong cleaning products as they can scratch or damage the ceramic finish.
4. Check the Power Cord: Regularly inspect the power cord for any signs of wear or damage. If you notice any issues, replace the cord to ensure safe and reliable operation.
5. Clean the Bulb Socket: Periodically clean the bulb socket to ensure proper contact between the light bulb and the electrical connectors. This will help maintain the functionality of the light and the warmer.
6. Use the Right Wax: To prevent clogging or damage to the dish, always use the recommended wax melts or essential oils that are compatible with the ASAWASA Long Cyan Wax Melt Warmer.
7. Avoid Wax Overflows: Do not overfill the dish with wax. Using smaller pieces or suitable wax melts will prevent any potential spillage when the wax melts.
8. Store Properly: When not in use, store the wax warmer in a dry place to keep dust out and avoid any potential damage.
By following these cleaning and maintenance steps, you can ensure that your ASAWASA Long Cyan Wax Melt Warmer remains in good condition and continues to provide you with a pleasant fragrance experience. For more detailed instructions, refer to the "Care & Maintenance" section of the owner's manual.
Add New Comment