User Manual Q&AAnswer
Dec 25, 2024 - 10:09 PM
To replace the battery in the Teriph Battery LCD Writing Tablet, follow these steps:
1. Locate the battery compartment on the back of the tablet. It is usually a small rectangular slot.
2. Use a small screwdriver or a coin to gently pry open the battery compartment cover.
3. Remove the old CR2020 coin cell battery from the compartment. Take note of the battery's orientation, as you will need to insert the new battery in the same way.
4. Insert a new CR2020 coin cell battery into the compartment, making sure it is properly aligned with the positive (+) and negative (-) markings.
5. Press the battery compartment cover back into place until it clicks securely.
6. Turn on the tablet to check if the new battery is working properly. The tablet should power on and display the writing surface.
Note: It is recommended to use a CR2020 coin cell battery for replacement. These batteries are widely available in stores or online. Make sure to dispose of the old battery properly according to local regulations.
If you encounter any difficulties or have further questions, please refer to the user manual provided with the Teriph Battery LCD Writing Tablet.
Add New Comment