User Manual Q&AAnswer
Dec 25, 2024 - 09:42 PM
To activate the steam spraying feature on the Greenbo 5371 Cool Walking Dinosaur Toy, please follow these steps:
1. Ensure that the dinosaur is powered on and the batteries are properly installed.
2. Attach the tail to the dinosaur's body securely.
3. Take the plastic bottle provided and fill it with water. Make sure to fill it to the recommended level indicated on the bottle.
4. Connect the filled plastic bottle to the designated steam function area on the dinosaur. There should be a connector or nozzle where you can attach the bottle.
5. Once the bottle is properly connected, gently squeeze it to release the water into the dinosaur's steam mechanism.
6. The dinosaur should now be able to spray steam when prompted by certain actions or buttons on the remote control.
Please note that the steam spraying feature may require multiple steps or actions to activate, such as shooting at the dinosaur with the remote control. Refer to the user manual for specific instructions on how to trigger the steam spraying feature and the corresponding actions or buttons on the remote control.
If you are still experiencing difficulties or the steam spraying feature is not working as expected, please refer to the troubleshooting section in the user manual or contact Greenbo customer support for further assistance.
Add New Comment