User Manual Q&AAnswer
Dec 25, 2024 - 09:41 PM
The Sikaye Remote Control Robot features a rechargeable battery that can be charged using the included USB cable. To charge the robot, follow these steps:
1. Locate the charging port on the robot. It is usually located on the back or bottom of the robot.
2. Insert one end of the USB cable into the charging port of the robot.
3. Plug the other end of the USB cable into a power source, such as a computer USB port or a USB wall adapter.
4. The robot's LED lights should indicate that it is charging. The lights may flash or remain steady during the charging process.
5. Allow the robot to charge for the recommended time specified in the user manual. This time may vary depending on the battery capacity.
6. Once the robot is fully charged, disconnect the USB cable from both the robot and the power source.
Note: It is important to use the provided USB cable and avoid using a different cable or charger, as it may not be compatible or could potentially damage the robot's battery.
Add New Comment