User Manual Q&AAnswer
Dec 25, 2024 - 09:40 PM
To program the SGILE SHJ-2001 robot, follow these steps:
1. Turn on the robot by switching the power button located on its back or underside.
2. Use the remote control to enter programming mode. Look for a button or switch labeled "Programming" or "Program."
3. Once in programming mode, use the remote control to record a sequence of movements. For example, you can make the robot turn, move forward, or dance.
4. After recording the desired sequence, save it by pressing the "Save" or "Enter" button on the remote control.
5. To play back the programmed actions, use the remote control to select the program you want to run. The robot will then execute the recorded sequence of movements.
You can program up to 50 motion commands using the one-button programming feature. This allows you to create custom routines for the robot, such as walking, dancing, or turning. Refer to the user manual for specific instructions on entering programming mode and recording actions.
Note: Make sure the robot is fully charged before programming and using its features.
Add New Comment