User Manual Q&AAnswer
Dec 25, 2024 - 08:59 PM
Programming the LEXiBOOK DOG01 Programmable Robot Puppy is a fun and interactive way to customize its actions. Here are the step-by-step instructions on how to program the robot puppy:
1. Make sure the robot puppy is turned on and functioning properly.
2. Locate the programming button on the robot puppy. It is usually labeled or indicated in the user manual.
3. Press and hold the programming button until you hear a beep or see a light indicator.
4. Once the programming mode is activated, the robot puppy will be ready to receive your commands.
5. Decide on the sequence of actions you want the robot puppy to perform. For example, you can program it to walk forward, turn, and bark.
6. Use the provided instructions or refer to the user manual to input the specific commands for each action. This may involve pressing buttons, using the remote control (if included), or speaking voice commands.
7. After inputting each action, confirm or save the command by pressing the programming button again.
8. Repeat the process for each action you want to program.
9. Once you have programmed all the desired actions, exit the programming mode by pressing the programming button again or following the instructions in the user manual.
10. Test the programmed actions by activating them through voice commands, remote control, or pressing the corresponding buttons on the robot puppy.
Remember to consult the user manual for any specific programming features or additional instructions that may be unique to the LEXiBOOK DOG01 Programmable Robot Puppy.
Add New Comment