User Manual Q&AAnswer
Dec 25, 2024 - 08:48 PM
Assembly Instructions for Elenco TTR-893 Teach Tech Zivko The Robot:
1. Start by gathering all the components included in the package: the robot body parts, sensors, motors, assembly tools, and the instruction manual.
2. Carefully read through the instruction manual to familiarize yourself with the assembly process and ensure you have all the necessary components.
3. Begin by attaching the motors to the designated motor mounts on the robot body. Follow the instructions in the manual for proper alignment and secure the motors using the provided assembly tools.
4. Next, attach the sensors to their designated positions on the robot body. Make sure they are securely attached and aligned correctly as indicated in the manual.
5. Connect the wires from the motors and sensors to the corresponding ports on the robot body. Ensure that the connections are secure and properly inserted.
6. Once all the components are attached and connected, follow the instructions in the manual to install the battery compartment. Insert four AAA batteries (not included) into the battery compartment.
7. After completing the assembly, carefully review the manual's programming section to learn how to program and control the robot using the provided remote control (if applicable).
8. Test the robot's functionality by turning it on and following the instructions in the manual to program basic movements and commands.
Note: If you encounter any difficulties during the assembly process or have specific questions, refer to the detailed instructions provided in the Elenco TTR-893 Teach Tech Zivko The Robot user manual.
Add New Comment