User Manual Q&AAnswer
Dec 25, 2024 - 08:25 PM
To calibrate the Fishfun DGL-B scale, please follow these steps:
1. Hang the scale vertically without any electrical interference.
2. Press the [ ] key to turn on the scale. When the display shows "-HI-", quickly press the [UNIT] key three times. The display will show a random number.
3. Press the [Z/T] key, and the display will show "CAL" followed by a flashing calibration weight of either "25.00" or "20.00".
4. Hang a 25kg or 20kg weight (according to the value shown on the screen) on the hook. Wait for the weight to stabilize, and then press the [Z/T] key. The display will show "PASS" and return to the weighing interface, indicating that the calibration is complete.
5. Press the [ ] key to turn off the scale, and then press the [ ] key again to turn it back on. Hang a test weight on the hook to verify if the scale is accurate. If it is not, repeat the calibration process.
Note: The Fishfun DGL-B scale is professionally factory-calibrated before shipment and does not typically require recalibration by the end user. Only recalibrate the scale if you believe it is not providing accurate measurements.
Add New Comment