User Manual Q&AAnswer
Dec 25, 2024 - 08:12 PM
Sure! Here's a step-by-step guide on how to set up the STAR MOON 18227-86 Electric Scentsy Wax Warmer:
1. Unbox the Warmer: Carefully open the package and ensure that all the items are present, including the warmer, plug, bulbs, and user manual.
2. Putting in the Bulb: xxxx the 120V, 25W bulb that came with the warmer into the socket for bulbs.
3. Add the Wax: Place your desired scented wax cube or tart into the dish on top of the warmer.
4. Connect the Plug: Plug the warmer into a standard 120V AC wall outlet.
5. Switch On: Slide the switch to the "on" position to start warming the wax and releasing the scent.
6. Set Up the Remote Control (if applicable): If your model comes with a remote control, ensure it is set up and the batteries are inserted for convenient operation.
7. Where to Put the Warmer: Choose a location with good air flow to allow the scent to spread throughout the room.
8. Make Sure the Power Source Works: Ensure that the outlet you're using provides a functioning 120V AC power source.
9. Put Only One Wax Cube: Place only one wax cube or tart in the dish to prevent any spills when it melts.
10. Avoid Water: Keep the warmer and wax dish dry during use to prevent damage.
11. Monitor the Warmer: Keep an eye on the warmer during the first use to ensure it doesn't get too hot.
12. Cool Down: If the warmer becomes too hot, turn it off and allow it to cool down before using it again.
13. Make Sure It's Stable: Place the warmer on a flat, heat-resistant surface to prevent accidents.
14. Taste Different Smells: Feel free to switch to different scents to suit your mood.
15. Check the Plug and Wires: Regularly inspect the plug and wires for any signs of wear or fraying. If damaged, replace them.
By following these steps, you should be able to set up and enjoy your STAR MOON 18227-86 Electric Scentsy Wax Warmer. For more detailed instructions and safety information, please refer to the user manual provided with the product.
Add New Comment